DesignerWood Aluminium Image

DesignerWood Aluminium Image has undergone the following fire tests and received the following results.

Fire Certifications

Fire Test	Result	Certificate #
AS/NZ 3837-1998	Group 1 Rating	18-003574; 18-003575
AS/NZ 1530.3-1999	Spread of Flame – Index 0 Finish thickness less than 1mm	18-002786; 18-002787

BCA Compliance
DesignerWood Aluminium Image battens and claddings are suitable where non-combustible materials are required in accordance with Deemed-to-Satisfy Provisions C1.10 and C1.9 (e)(v) of the 2019 NCC, Building Code of Australia (BCA).

BCA Section C, Part C1, C1.9 (e)(v) states:
The following materials may be used wherever a non-combustible material is required:
(v) Pre-finished metal sheeting having a combustible surface finish not exceeding 1mm thickness and where the Spread-of-Flame Index of the product is not greater than 0.

CLICK HERE to receive a copy of one of our Fire Certificates or to discuss your requirements.

Useful Tools:

Specification Writer – have the product specification wording sent to your inbox instantly
Group Rating Calculator – see what group rating is required for your project

Click below to download the DesignerWood Aluminium Image Technical Data Sheet & Installation Guides and brochures.

DesignerWood Aluminium Range Brochure	DesignerWood Aluminium Image Tech & Install Guide

 

Profile

Select from one of our standard batten or plank 2 piece click profile options.

Contact our Architectural Team if you have any other profile requirements.

2-Piece Click Batten System

30 x 50 mm; 30 x 85 mm; 50 x 50 mm; 50 x 100 mm & 100 x 100 mm

2-Piece Click Plank System

12 x 100 mm

 

Finish Colours

Created to replicate actual timber species, our 18 photo-realistic colour options, most
of which include a unique texture feel to enhance realism, will complement or add
contrast to any surface. Colour matched end caps are also available to ensure a seamless finish.

Samples are available on request.

Click to view larger image.

Please note colours can vary depending on screen resolution, we recommend you request a sample for a true representation.

Application
DesignerWood Aluminium Image is suitable for use as an internal lining on walls and ceilings or as an external decorative cladding for residential and commercial buildings.

Material
Lightweight solid aluminium hollow profiles with a photorealistic timber finish.

Lengths
Battens are available in 5700mm lengths and can be cut to size or fully customised to project requirements.

See the DesignerWood Aluminium Image Technical Data & Installation Guide for full details on Warranty, Maintenance &  Handling 

Warranty

10 year warranty against splitting, warping, expanding, fade or insect damage.

Suitable for high UV, high humidity and marine environments

Storage & Handling

Appropriate measures should be used when unloading the materials to avoid unnecessary damage.

See the DesignerWood Aluminium Image Technical Data & Installation Guide for full details on Warranty, Maintenance &  Handling 

Maintenance

Being an aluminium substrate with a photo-realistic timber wrap there us no maintenance required.

Compared to Timber and Steel, this can represent significant cost savings.

General cleaning and product checks still recommended.

 

If you are a builder, contractor or surveyor and require a project quote – please CLICK HERE.

All other quote enquiries, please use form below.

Want a sample of one of our Acoustic or Architectural Products?

Want to specify DesignerWood Aluminium Image?

Fill in the form below (or click here for new page) and we will provide you with the specification details instantly!

View all case studies here.